As an Amazon Associate I earn from qualifying purchases.
CNWOOAIVE 3 Jaw Inner Bearing Puller Gear Extractor Internal External Pulling for Motorcycle Wheel Car SUVCNWOOAIVE
- Application - designed for automotive flywheel, pump bearing, motorcycle wheel, generator bearing, bicycle wheel, machine bearing etc.
Function - it can be used to remove all sleeve type bearings with an inner diameter of 1/2-2. Material - constructed from high quality chrome vanadium just forging, the overall heat treatment, strong and durable.
Features - there are two installation methods for the claw foot. Corrosion-resistant black oxide finish, preventing damage to bearings. Advantage - the three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use.
FreeTec Bearing Extractor Set Inner Internal Blind Remover Bushes Puller,16 pcsFreeTec
- For removal of Pilot Bushes Bearings etc, from blind housings. Screw adaptors m10x1. 5p, m10x1. 5p/m8x1. 25p, m10x1. 5p/m6x1. 0p. One slide hammer assemble 2.
5 jaws. Thread:m10×1. 5p, m8×1. 25p, m10×1. 5p, m10×1. 5p m6×1. 0p. Collets sizes:8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm.
|Height||10 cm (3.94 Inches)|
|Length||43 cm (16.93 Inches)|
|Weight||3 kg (6.61 Pounds)|
|Width||32 cm (12.6 Inches)|
AUTOAND Inner Bearing Puller Set, Universal 9-23mm in Diameter Internal Bearing Extractor Tool for All MotocycleAUTOAND
- Well-made, sturdy and durable, not easy to be corroded. Inner bearing puller: the inner bearing Puller is fixed on the inner bearing, and it is taken out with uniform external force without damaging it.
Bearing inner diameter range: 9mm-23mm. Widely compatibility: internal Bearing Extractor Tool automotive steering wheel, machine bearing, pump generator bearing, bicycle wheel, motorcycle wheel, etc.
Open clamps : bearing pullers Kit contains 5 different sizes of open clamps, and your various needs can be satisfied. High quality: the inner bearing puller Set is made of high-quality chrome vanadium steel. Our products are used to take out bearings with a diameter of 9mm-23mm 036"-09".
DASBET 5pcs Blind Inner Internal Bearing Puller Slide Hammer SetDASBET
- Bearing extractor 3: 5/8" to 1" 18mm-25mm ;bearing Extractor 4: 1" to 1-1/4" 25mm-32mm. Bearing extractor collets with internal Capacity From 3/8" 10mm To 1-1/4" 32mm. Bearing extractor 1: 3/8" to 1/2" 10mm-14mm ;bearing Extractor 2: 9/16" to 11/16" 15mm-19mm.
Form fitted Case is included for storage and organization. Open clamps by turning handle clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts.
3-Jaw Pilot Bearing Puller Reversible Inner Bearings Gear Extractor Internal External Pulling for Motorcycle Car Auto, Pilot Bearing PullerHilitand
- Application: the internal/external pulling tool is mainly used for the removal of gear, bearing, bushing and more. Heat treatment process: the inner bore bearing extractor has been heat treated to give it a higher hardness and a longer service life.
Essential repair tool: This is an essential repair tool for home, car repair and mechanical repair.
Reversible jaw design: this 3-jaw pilot reversible bearing puller features a reversible jaw design, which is suitable for internal/external pulling applications. High quality materials: This three-jaw puller top is made of heavy-duty alloy steel for durability.
|Height||5 cm (1.97 Inches)|
|Length||18 cm (7.09 Inches)|
|Weight||0.77 kg (1.7 Pounds)|
|Width||14 cm (5.51 Inches)|
6. DA YUAN
9pc 8-32mm Blind Hole Inner Bearing Puller Set Remover Slide Hammer Internal KitDA YUAN
- Select the appropriate sized collet by comparing it with the application. Insert collet, expand it to fit the hole, and attach the slide hammer assembly.
Slide hammer shaft: 1. 2ft long 390mm. Includes 8 expandable collets, Fitting a wide range of applications. Perfect for pulling jobs requiring an internal pull, such as pilot bearings.
MOTOCOCHE 9-23mm Motorcycle Inner Bearing Puller Set, Bearing Extractor Kit Internal Slide Hammer Removal Tool（5 PCS Open ClipsMOTOCOCHE
- Wide range of applications: compatible with motorcycle wheel, Pump bearing generator bearing, Automotive flywheel, Bicycle wheel, Machine bearing etc. You need a slide hammer to get the job done. Ideal motorcycle bearing puller tool: connect the 1/2" 3/4" external threaded faucet.
It is a good motorcycle bearing pullers tool suitable for individuals, 4S shops and repair shops. For use in removing Sleeve Type Bearings From Diameter 036" to 09" 9mm-23mm. Kindly note: For the bearings that were quite tight. Meet most of your needs.
Easy to use: select the sleeve head corresponding to the inner diameter of the bearing, turn the screw clockwise forcefully to prop up the three legs of the sleeve, then snap into the inner diameter of the bearing, and after installation in place, use a wrench to turn the nut until the bearing is removed smoothly.
High-quality materials: the bearing extractor set is made of high-quality chrome vanadium steel with high strength and high hardness, overall heat treatment and the surface is coated with an anti-oxidation coating, which is anti-corrosion and anti-rust, and can be used for a long time.5 sizes open clips: the internal bearing removal tool kit is equipped with 5 different sizes of open clips, 035 inch 9mm, 043 inch 11mm, 055 inch 14mm, 0
8. Brave Tools
Brave Tools 9pc Inner Bearing Puller Tool Set Remover Slide Hammer Internal Blind Hole 8-32mmBrave Tools
- Made from durable steel for long-lasting performance. Compact and lightweight design makes it easy to use in tight spaces. Ideal for professional mechanics and DIY enthusiasts.
Versatile design suitable for use on a wide range of vehicles and machinery. Comprehensive set includes everything you need to remove bearings and press-fit components.
|Weight||3.65 kg (8.05 Pounds)|
|Warranty||1 Year Manufacturer|
DAYUAN Inner Bearing Puller Set Remover Slide Hammer Internal Kit 8-32mm 9pc Blind HoleDAYUAN
- Slide hammer shaft: 1. 2ft long 390mm. Includes 8 expandable collets, Fitting a wide range of applications. Perfect for pulling jobs requiring an internal pull, such as pilot bearings.
Select the appropriate sized collet by comparing it with the application. Insert collet, expand it to fit the hole, and attach the slide hammer assembly.
PLAYOCCAR Motorcycle Inner Bearing Extractor Kit, Internal Bearings Puller Removal Tool Set with 5 Sizes Open Clips 9-23mmPLAYOCCAR
- Complete packagea set of bearing puller equipped with 5 sizes of open clips to meet the need, 074inch 19mm, 035inch 9mm, 043inch 11mm, 055inch 14mm, 091inch 23mm. The surface treated with oxidation resistance, rust-proof & durable.
High efficiencyput the head of the tool into the inner bearing ring and screw it into the shaft, near the bearing, open the fixture, and pull out the inner shaft evenly without damaging to other parts.
Working principlefirst connects the 1/2"3/4" external threaded faucet, and then use external pulling force of traction the tool to obtain effective remove.
Perfectly compatibleinner bearing extractor suitable for 9-23mm 035-091 inch sleeve bearing parts such as motorcycle wheels, bicycle wheels, generator bearings, automobile steering wheels, etc. Hard and durablebearing pullers high-quality cr-v to heat-treated, has good wear resistance and not easy to bend deformed. This will be your ideal tool.
|Height||19 cm (7.48 Inches)|
|Length||23 cm (9.06 Inches)|
|Width||6 cm (2.36 Inches)|